RING EXCHANGE/RESIZE
THIS IS A RESIZE/EXCHANGE SERVIC. (non refundable)
RESIZE/EXCHANGE SERVICE IS AVAILABLE WITHIN THE FIRST 30 DAYS FROM DELIVERY OF YOUR RING. (NO EXCEPTION)
AFTER YOU PURCHASE THIS SERVICE PLEASE CONTACT ME AND I WILL SEND YOU INSTRUCTIONS TO RETURN THE RING.
----IT IS IMPORTANT THAT YOU ADD A NOTE DURING CHECK OUT PROCESS WITH THE NEW RING SIZE AND WIDTH OR ANY OTHER DETAILS, MATERIALS , FINISH ETC---
exchange/resize process will start once a valid tracking number for the returned ring is provided.
EVEN IF YOU WERE SIZED BY PROFESSIONAL THERE ARE MANY FACTORS THAT COULD AFFECT THE RING SIZE. COMFORT FIT, RING WIDTH AND READING METHOD ARE THE MAIN FACTORS THAT CUSTOMERS USUALLY DO NOT CONSIDER WHEN SIZED BY PROFESSIONAL.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
----IF THE RESIZED/EXCHANGED RING DOES NOT FIT AGAIN, PLEASE CONTACT ME TO FIND THE BEST SOLUTION FOR YOU----
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
THIS BELOW ARE MY SIZING GUIDELINES AND READING METHOD. THIS ARE NOT STRAIGHT RULES BECAUSE EVERY FINGER IS DIFFERENT.
See listing photo to help you to get the exact size for the new ring.
The lower edge on the metal ring sizing mandrel will give you the exact size you need. On the drawing the ring size is 10 because the lower edge of the ring is right on the size 10 line mark.
Some jewelers consider the center of the ring as the final size but it is not correct .
FLAT RING (INSIDE) Wider bands fit more snugly than narrow bands, so the width of the ring sizer bands that they used will affect the size. Generally you would go up 1/4 size for rings 5-6mm wide and 1/2 size for rings 7-8mm wide.
Ideally you want to be sized with bands that are the same width and fit as the ring that you are getting.
Please follow these guidelines to determinate the correct ring size.
ALL RINGS LISTED WITH WOOD ON THE INSIDE ARE COMFORT FIT
COMFORT FIT SIZE:
Most of the time the ring feels to big because the customer did not consider the comfort fit factor before ordering which is very very important.
As a general rule, if your finger measures a standard size 9 by your jeweler, your comfort fit size should be an 8.5 but this is only a general recommendation not a hard rule. Here's where it gets a little tricky; For rings that have a shank wider than 8mm, it is not recommended to go down a half size because the ring's width negates the extra room of the comfort fit's design.
As our rule, all of our rings measure on our mandrels with the bottom most edge (not the center) of the ring sitting directly at the mark of the size ordered
I use the most accurate mandrel on the planet TRUE-SIZE by Kate Wolf Steel Grooved Ring Sizing Mandrel
Our sizings are spot on but we allow a tolerance of US sz +/-.25 (we allow a quarter size difference because of the many ring sizers available to jewelers today.
I STRONGLY SUGGEST TO USE THESE GUIDELINES ON THE JEWELRY SHOP WHERE YOU WILL GET SIZED, THEY WILL KNOW WHAT TO DO.
THIS IS A RESIZE/EXCHANGE SERVIC. (non refundable)
RESIZE/EXCHANGE SERVICE IS AVAILABLE WITHIN THE FIRST 30 DAYS FROM DELIVERY OF YOUR RING. (NO EXCEPTION)
AFTER YOU PURCHASE THIS SERVICE PLEASE CONTACT ME AND I WILL SEND YOU INSTRUCTIONS TO RETURN THE RING.
----IT IS IMPORTANT THAT YOU ADD A NOTE DURING CHECK OUT PROCESS WITH THE NEW RING SIZE AND WIDTH OR ANY OTHER DETAILS, MATERIALS , FINISH ETC---
exchange/resize process will start once a valid tracking number for the returned ring is provided.
EVEN IF YOU WERE SIZED BY PROFESSIONAL THERE ARE MANY FACTORS THAT COULD AFFECT THE RING SIZE. COMFORT FIT, RING WIDTH AND READING METHOD ARE THE MAIN FACTORS THAT CUSTOMERS USUALLY DO NOT CONSIDER WHEN SIZED BY PROFESSIONAL.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
----IF THE RESIZED/EXCHANGED RING DOES NOT FIT AGAIN, PLEASE CONTACT ME TO FIND THE BEST SOLUTION FOR YOU----
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
THIS BELOW ARE MY SIZING GUIDELINES AND READING METHOD. THIS ARE NOT STRAIGHT RULES BECAUSE EVERY FINGER IS DIFFERENT.
See listing photo to help you to get the exact size for the new ring.
The lower edge on the metal ring sizing mandrel will give you the exact size you need. On the drawing the ring size is 10 because the lower edge of the ring is right on the size 10 line mark.
Some jewelers consider the center of the ring as the final size but it is not correct .
FLAT RING (INSIDE) Wider bands fit more snugly than narrow bands, so the width of the ring sizer bands that they used will affect the size. Generally you would go up 1/4 size for rings 5-6mm wide and 1/2 size for rings 7-8mm wide.
Ideally you want to be sized with bands that are the same width and fit as the ring that you are getting.
Please follow these guidelines to determinate the correct ring size.
ALL RINGS LISTED WITH WOOD ON THE INSIDE ARE COMFORT FIT
COMFORT FIT SIZE:
Most of the time the ring feels to big because the customer did not consider the comfort fit factor before ordering which is very very important.
As a general rule, if your finger measures a standard size 9 by your jeweler, your comfort fit size should be an 8.5 but this is only a general recommendation not a hard rule. Here's where it gets a little tricky; For rings that have a shank wider than 8mm, it is not recommended to go down a half size because the ring's width negates the extra room of the comfort fit's design.
As our rule, all of our rings measure on our mandrels with the bottom most edge (not the center) of the ring sitting directly at the mark of the size ordered
I use the most accurate mandrel on the planet TRUE-SIZE by Kate Wolf Steel Grooved Ring Sizing Mandrel
Our sizings are spot on but we allow a tolerance of US sz +/-.25 (we allow a quarter size difference because of the many ring sizers available to jewelers today.
I STRONGLY SUGGEST TO USE THESE GUIDELINES ON THE JEWELRY SHOP WHERE YOU WILL GET SIZED, THEY WILL KNOW WHAT TO DO.
THIS IS A RESIZE/EXCHANGE SERVIC. (non refundable)
RESIZE/EXCHANGE SERVICE IS AVAILABLE WITHIN THE FIRST 30 DAYS FROM DELIVERY OF YOUR RING. (NO EXCEPTION)
AFTER YOU PURCHASE THIS SERVICE PLEASE CONTACT ME AND I WILL SEND YOU INSTRUCTIONS TO RETURN THE RING.
----IT IS IMPORTANT THAT YOU ADD A NOTE DURING CHECK OUT PROCESS WITH THE NEW RING SIZE AND WIDTH OR ANY OTHER DETAILS, MATERIALS , FINISH ETC---
exchange/resize process will start once a valid tracking number for the returned ring is provided.
EVEN IF YOU WERE SIZED BY PROFESSIONAL THERE ARE MANY FACTORS THAT COULD AFFECT THE RING SIZE. COMFORT FIT, RING WIDTH AND READING METHOD ARE THE MAIN FACTORS THAT CUSTOMERS USUALLY DO NOT CONSIDER WHEN SIZED BY PROFESSIONAL.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
----IF THE RESIZED/EXCHANGED RING DOES NOT FIT AGAIN, PLEASE CONTACT ME TO FIND THE BEST SOLUTION FOR YOU----
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
THIS BELOW ARE MY SIZING GUIDELINES AND READING METHOD. THIS ARE NOT STRAIGHT RULES BECAUSE EVERY FINGER IS DIFFERENT.
See listing photo to help you to get the exact size for the new ring.
The lower edge on the metal ring sizing mandrel will give you the exact size you need. On the drawing the ring size is 10 because the lower edge of the ring is right on the size 10 line mark.
Some jewelers consider the center of the ring as the final size but it is not correct .
FLAT RING (INSIDE) Wider bands fit more snugly than narrow bands, so the width of the ring sizer bands that they used will affect the size. Generally you would go up 1/4 size for rings 5-6mm wide and 1/2 size for rings 7-8mm wide.
Ideally you want to be sized with bands that are the same width and fit as the ring that you are getting.
Please follow these guidelines to determinate the correct ring size.
ALL RINGS LISTED WITH WOOD ON THE INSIDE ARE COMFORT FIT
COMFORT FIT SIZE:
Most of the time the ring feels to big because the customer did not consider the comfort fit factor before ordering which is very very important.
As a general rule, if your finger measures a standard size 9 by your jeweler, your comfort fit size should be an 8.5 but this is only a general recommendation not a hard rule. Here's where it gets a little tricky; For rings that have a shank wider than 8mm, it is not recommended to go down a half size because the ring's width negates the extra room of the comfort fit's design.
As our rule, all of our rings measure on our mandrels with the bottom most edge (not the center) of the ring sitting directly at the mark of the size ordered
I use the most accurate mandrel on the planet TRUE-SIZE by Kate Wolf Steel Grooved Ring Sizing Mandrel
Our sizings are spot on but we allow a tolerance of US sz +/-.25 (we allow a quarter size difference because of the many ring sizers available to jewelers today.
I STRONGLY SUGGEST TO USE THESE GUIDELINES ON THE JEWELRY SHOP WHERE YOU WILL GET SIZED, THEY WILL KNOW WHAT TO DO.